We provide spare parts for any of the following:

MEASUREMENT AND CONTROL SYSTEMS
Systems - Non-scanning
Systems - Multiple Profile Scanning
Systems - Polar Profile Scanning
Systems - Single Profile Scanning

SOLENOID VALVES
Direct and pilot operated. DIRECT have the solenoid armature directly connected to the valve spool or poppet. PILOT use small integral direct solenoid valves to switch pilot air pressure to operate the main valve element.

PILOT VALVES
Valves operated from a pilot air signal. Can be Pilot/Spring (pilot operated with spring return) Pilot/Pilot (pilot operated with pilot return) or Priority pilot/Pilot (pilot differential area).

MANUAL-MECHANICAL VALVES
Valves with manual operators include a comprehensive range of neat compact push button, switch, rotary, and key operated units for panel mounting.

SAFETY VALVES
Valves specifically designed to enable users to comply with particular industrial safety requirements and safe working practices.

VALVE ISLANDS
Fully assembled and ready-to-use modular sub-base valve banks with all solenoids pre-wired to a multipole connector of your choice. The quantity and mix of valve types can be specified to suit individual requirements.

FIELD BUS
Fieldbus is the generic term for serial communication systems used for control in the industrial work place.

SYSTEM VALVES & VALVE ACCESORIES
This category contains important system related components as well as accessories for specific valve types and ranges.

Special Valves

CUP MOUNTS
Norgren’s various cup mounts offer simple ways to mount and pipe vacuum cups. You even have the option to generate vacuum at each vacuum cup. The designs available offer a rigid mount, orbital mount and spring loaded mount.

VACUUM CUPS
Norgren Automotive offers round, oval, convoluted and low-profile cups in various sizes. Incorporated into these cups is a mount that offers quick-change ability. This industry standard is known as a "Vac-Lok" Mount.

VMAA SERIES SMART PUMP
A single channel vacuum generator that offers an Intelligent User Interface. Smart Pump eliminates the need for valves, gages, sensors, proximity switches, silencers and excess cables by integrating all of these into one.

VMS Series Smart Pump

FILTERS
Various grades of filter exist to remove condensate, dirt, oil, oil vapor and most hydrocarbon odors.

FILTERS-REGULATORS
Dual function products that reduce air pressure to an adjustable level after removing water, dirt and dust.

PRESSURE REGULATORS
Pressure regulators reduce pressure to a level that is required by the application.

LUBRICATORS
Lubricators distribute oil into the compressed air line. This can significantly increase the life of downstream equipment such as valves and actuators.

PRESSURE RELIEF VALVES
Sometimes known as PRV's, these products will protect downstream equipment by relieving any excessive pressure. Pressure relief valves should be selected according to their relief flow rate and not necessarily by their product family.

CONTROL VALVES
A comprehensive range of soft start valves, dump valves and combined soft start/dump valves.

AIR DRYERS
Our 'point of use' membrane air dryers remove water vapor. They are ideal for applications demanding moisture free air, for example inkjet print heads and air bearings.

ACCESSORIES (Excelon)
Accessories for Excelon products including shut-off valves, mounting brackets, and tamper resistant devices.


ACCESSORIES (Olympian Plus)
Accessories for Olympian Plus products including yokes, shut-off valves, mounting brackets, and tamper resistant devices.


ACCESSORIES (Ported)
Accessories for Ported products including tamper resistant kits, drip leg drains, and lubricator liquid level switches.

PRESSURE GAUGES
A comprehensive range of gauges featuring triple calibrated faces - bar, psi and MPa (megapascals).

SERVICE KITS & REPLACEMENT FILTER ELEMENTS
Service kits and replacement elements for all Norgren air preparation products.

PNEUMATIC - Vacuum Electro-mechanical Switches
Pressure changes will be converted into an electrical signal by means of a pressure sensor, a mechanic transmission system and a switching element (microswitch).

PNEUMATIC - Vacuum Electronic Switches
Pressure changes will be converted into an electrical signal by means of a sensor element and an integral electronic evaluation unit.

PNEUMATIC - Vacuum Pressure Sensors
Pressure changes will be converted into a standard proportional analogue output signal by means of a sensor element and an electronic unit which amplifies, linearises and temperature compensates the signal.

HYDRAULIC- Electro-mechanical Switches
Pressure changes will be converted into an electrical signal by means of a pressure sensor, a mechanical transmission system and a switching element (microswitch).

HYDRAULIC- Electronic Switches
Pressure changes will be converted into an electrical signal by means of a sensor element and an integral electronic evaluation unit.

ALLFLUID Electro-mechanical Switches
Pressure changes will be converted into an electrical signal by means of a pressure sensor, a mechanical transmission system and a switching element (microswitch).

ALLFLUID Electronic Switches
Pressure changes will be converted into an electrical signal by means of a sensor element and an electronic evaluation unit.